| Low price and high reliability
105℃ output capacitor
AC input power suitable for the world
Hight efficiency and low operation temperature
Soft-start current can reduce the AC input impact effecticly
With Short-circuit and owwerload protection
Compact size,light weight
100% full-load burning test
Installed with EMI filter,minimum wave |
|
Model
Specification | S-15-5 | S-15-12 | S-15-24 |
| DC output voltage | 5V | 12V | 24V |
| Output voltage error（Note：2） | ±2% | ±1% | ±1% |
| Rated output current | 3A | 1.3A | 0.7A |
| Output current rage | 0-3A | 0-1.3A | 0-0.7A |
| Wave and noise(Note ：3） | 50mVp-p | 50mVp-p | 100mVp-p |
| Inlet stability(Note ：4） | ±0.5% | ±0.5% | ±0.5% |
| Load stablity (Note ：5） | ±1% | ±0.5% | ±0.5% |
| DC output power | 15W | 15.6W | 16.8W |
| Efficiency | 65% | 68% | 72% |
| Adjustable range for DC voltage | +10,-5% | +10% | +10% |
| AC input voltage range | 85-132VAC/170-264VACSelected by switch47-63Hz240-370VDC |
| Input current | 0.5A/115V 0.25A/230A |
| AC INnrush current | Cold-start current15A/115V 30A/230V |
| Leakage current | <0.5mA/240VAC |
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery |
| Over-voltage protection | |
| High-temperature protection | |
| Temperature coefficient | ±0.02%/℃（0-50℃） |
| Setup rise hold up time | 200ms,100ms,30ms |
| Vibration | 10-500HZ,2G 10min,/1cyclePeriod for60minEach axes |
| Withstand voltage | Input and output internal：1.5KVAC,Input and
enclosure：1.5KVAC,Output and enclosure：0.5KVAC |
| Isolation resistance | Input and output internal:Input and enclosure,Output and
enclosure：500VDC/100M |
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve）20%~90%RH |
| Store temperature and humidity | -20℃~+85℃10%~95%RH |
| Overall dimension | 99×97×35mm |
| Weight | 0.3Kgs |
| Safety standards | Meet UL 1012 requirement(Not apply for the mark) |
| EMC standards | Meet FCC part15J Conduction classB |
Note：
1.The testing condition for the paramenter above is :230VAC
input,rated load,25℃70% RH.Humidity.
2.Error.include the setting error,line stability and load
stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF
capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage
of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%. |
